The basic cost to hire and construct a typical 25x 10mt aluminium framed building with 60mm PIR cladding to the walls and roof for a 36 month duration would be;
Installation- ÂŁ18,500
Monthly hire- ÂŁ2650
As can by seen clearly from the figures, upfront costs for installation can be high in relation to the on-going rental. This is why longer term contracts are more cost effective overall.
However, costs can vary significantly depending on a number of different factors including;
- The size of the building required, including footprint and height. High buildings can cost considerably more to build (apart from materials) due to increased labour input and larger plant equipment, such as cranes, that are required.
- Finding or creating a good flat surface to fit the building too. Temporary buildings do not have foundations and are staked or bolted which requires a solid base.
- Specification of materials such as insulation and roofing. Buildings that use higher grade (thicker) PIR panels, fully insulated roofs or inflatable sandwich roofs differ in cost. In general, buildings which are fully insulated with solid PIR panels, including to the roof, as opposed to Inflatable, are around 20% more expensive once the higher installation costs are factored in. But once again, these increased costs are mitigated by energy savings over longer hire periods.
- Specification of the cooling system. Costs vary depending on the holding temperature required. In general, the lower the temperature the more cooling is required. However, if higher specification insulation is supplied this reduces the cooling requirement. As a result, higher grade insulation is recommended for longer term projects where energy savings can offset the increased up front costs.
- Internal finish can add significantly to the cost of a temporary building cold store. For instance, food products may need a clean flooring surface that may involve laying a resin finish with the associated costs.
So in conclusion, when temporary buildings are being specified as a cold store, there’s a balance to be struck between higher upfront costs for (higher specification) materials and installation, against energy savings in the longer term.
An experienced company such as Advanced Climate Rentals will be able to guide you through this complicated process to provide the best solution.