When this Trust needed chiller hire for hospital buildings they turned to ACR for a fast effective solution.
When this Trust needed chiller hire for hospital buildings they turned to ACR for a fast effective solution.
Required urgently, chiller hire for hospital was a service that this customer needed in a hurry.
Following problems the trust had been having with their roof mounted fixed chiller, a replacement solution was required quickly to maintain operation of this important facility.
Importantly, the chilled water supplies a chilled beam system, which in turn air conditions the building, keeping it within specification.
The 240kw chiller positioned. A cherry picker was used to install the hosing up the outside of the building to the roof plantroom.
Installing and connecting the 3″ rubber suction/ discharge pipe-work to the buildings water system.
ACR recommended a direct like for like replacement 220kw water chiller. It was proposed, that the chiller be mounted at ground level for fast, economical installation- a crane lift to the roof would be expensive and time consuming. It was also unclear if a suitable load tested position could be authorised quickly.
Mounting the chiller at ground level presented its own problems in terms of the pipe-work installation, but it was decided that this was the preferred option.
3″ rubber pipe-work system was installed to connect the temporary chiller to the clients access points in the roof plant-room. Using a cherry picker the hose was run down the side of the building and attached using feature grills for support- padding was used to prevent damage around the fixings.
The temporary pipe-work was connected to isolated 100mm flanges and adapted down to accommodate the 3″ hosing with Camloc connectors.
To prevent air entering the clients system, the temporary chilled water pipe-work was manually filled. Gradual opening of the clients valves allowed the pressure-set to adjust as required before fully opening to complete the circuit.
This chiller hire for a hospital system was installed, tested and commissioned within 8 hours of attending site. Furthermore, no problems have been encountered during its extended rental.
A good days work and a great project result.
ACR water chiller hire for all commercial applications- please click here
Using a cherry picker to install the temporary pipe-work up the outside of the building to the roof plantroom.
Temporary chilled water hose and ancillaries rental from Advanced Climate Rentals.
View Product
To provide temporary hospital ventilation hire whilst a AHU replacement programme was carried out.
View Industry
To provide temporary heat pump ventilation hire to a new ambulance triage centre whilst they awaited their new AHU. The AHU would be required to maintain the internal air temperature as well as ventilate the area.
View Industry
1000kw process chiller hire to assist with a plastic injection moulding process. The client was experiencing increasing production difficulties in the hot summer months due to on site chiller failures. Chilled water performs the important role of cooling the extrusion after the injection moulding process.
View Industry