Temporary Building Temperature Control

If you have a need, including emergencies, its best to get in touch immediately with as much information as possible to help specify equipment and give an indicative price before progressing to a site survey and full quotation.

Generally, to get a temporary cooling solution proposal you would need the following information;

1. Site location and contact details
2. Size and specification of the warehouse (including insulation specs if you have)
3. What you are storing and the temperature holding requirements.
4. external space available for the location of water chiller plant. Typically, a 200kw chiller will require a minimum open area of 6x4mt.
5. A suitable power supply. Generally, equipment is 400V three phase, and as an example, a typical 200kw cooling system would require a 200amp supply for the chiller and a 32 amp supply for the internal AHU’s.

Don’t worry if the above sounds daunting- we have the experience to get to your site fast and guide you through to solution.

Not particularly. The general requirements for successful installation are as follows;

1. Suitable space for the location of the plant. Internal AHU’s will require locating on existing racking or stands supplied. For example, a 200kw cooling system will require the location of three AHU’s with a footprint of 4x 2mt. The external chiller unit will need a clear outside space of 6x 4mt. Although, multiple smaller chillers can be supplied if space is restricted.
2. A small penetration, or other access point in the building will be required for the installation of the chilled water hosing, typically a 300x 200mm sized hole or other such as a door.
3. Access to a suitable electrical supply for the temporary power cabling connection.

Advanced Climate Rentals can give further advise with all of the above.

Basically, all warehouse areas where high temperatures are a problem for the stored products. Including;

• Logistic warehouses storing perishable or other goods that suffer from high temperature degradation, such fresh foods and raw ingredients, pharmaceuticals and other temperature sensitive products.
• Production/ warehouse areas that require a specific temperature and humidity control to operate efficiently.
• To meet statutory or other requirements for a safe operating environment for staff.

Generally, in a matter of days provided a company with the right experience and stock of equipment is approached to carry out the project.

Advanced Climate Rentals is such a company. We have many years experience in delivering all types of warehouse cooling projects, from small to the largest in all temperature ranges.

For some good insights into how we get things done please refer to the case studies found here on our site.